Da’Rail

Da’ Rail is an add-on forearm that converts your current stock / chassis to the new style PRS chassis with the longer and wider fore arms. Da’ Rail include that ARCA rail on the bottom side. Da’ Rail allows better balance on your support bag and also gives you a wider balance area with room to place your hand/ thumb to help steady the rifle like the wing / rails that are out there. Da’ Rail increases your useable forearm to over 17 inches, plenty of room for Bipods, bags and accessaries.

The Da’ Rail does all this at the fraction of the price it would cost to upgrade your chassis.

Dimensions 2 -3/4″ x 17 -5/8″

Steel 4 lbs 12 oz.      $249.95

Aluminum 1 lbs 10 oz  $229.95

Brass over 5 lbs $299.95

Accessories:

Barricade Stop – Aluminum

Adhesive foam strip, 36″ of 1/4″ x 3/32″. Reduces rock on forearms with radius

Barricade Stop – Aluminum and Adhesive foam strip, 36″ of 1/4″ x 3/32″. Reduces rock on forearms with radius

Hardware options:

Drill bit and Tap 10-32 with the (3) Mounting screws (B14)

Drill bit and Tap 10-32 with the (5) Mounting screws

T-nuts (3) with long screws (trim to length)

SS wood screws (3)   CZ MTR / wooden stocks

Threaded (4) to fit Da’Rail MPA BA COMP

M-Loc (5) Mounting screws for Da’ Rail

Rail has M-loc spacing screw Holes.

More INFO:

Rail has TWO slotted sections to allow for most existing chassis/ stock holes.

Rail had tapped 10-32 holes for mounting to MPA BA Comp

Rail has drilled and tapped holes to allow for a barricade stop.

Hardware & Accesories are available by selecting the options.

I would recommend using Loc-tite and torque screws to 30 in/lbs if in metal.

Add Barricade stop to Da’ Rail here: https://dstprecision.us/product/dst-barricade-stop/

If you have questions regarding mounting please TEXT 507-269-2995